TechToony Meeting Room

Frequently Asked Questions

Getting started

How do I start a call?

Open the home page, check your camera preview, type a name, and press Start call. You will land in an empty room with an invite link ready to copy. Send that link to whoever you are calling. When they open it you get a prompt asking whether to let them in.

Do I need to install anything? Or sign up?

No to both. Everything runs in the browser — no app, no extension, no plug-in — and there is no account to create. Rooms are made on the spot and disappear when the call ends.

What is the difference between the invite link and the host link?

The invite link is for your guests. It identifies the room, and nothing else — on its own it cannot open a call, it can only knock on one.

The host link is the same room ID plus a signature from the server. It is what makes you the host: it opens the room, admits people, and ends the call. Keep it to yourself. Its real use is rejoining your own call from another device, or after your browser crashes — not inviting anyone.

Anyone holding the host link is a host. Send it to the group chat by mistake and everyone in that chat can open the room and let strangers in. If it leaks, end the call and start a new one — a new call means a new ID and a new signature.

I opened a link and it says the call has not started. Why?

You have a guest link and the host is not there yet. Guest links cannot open a room, only join one that already exists. Leave the page open — it goes in on its own the moment the host starts the call.

Can I start a call of my own?

Only if you have the passcode. Starting a call runs on this server's connection, so the site opens onto a passcode prompt and shows nothing else until the passcode is accepted. An invite link is different: it already names the room it points at, so following one takes you straight to the join screen with no passcode asked. Ask the admin if you need one.

Why is the room ID so long?

Because it has to be unguessable. It is 24 random characters, so nobody is going to stumble into your call by typing a lucky URL. Treat the link as private even though it is only the guest half — someone who has it can knock at your door, repeatedly.

What is the optional password field for?

A second lock on the room, for when the invite link might be seen by people who should not use it — a shared screen, a group chat, a forwarded message. Without the password the server refuses the join outright, before anyone gets as far as knocking.

During the call

Is there a chat?

Yes — the speech-bubble button in the dock, or press C. Messages travel the same way your video does: straight to the other people in the call, over the connection that is already open, without passing through the server.

That has one consequence worth knowing. There is no history, because there is nowhere to keep it. Someone admitted ten minutes in starts with an empty panel, and everything said is gone the moment the call ends. If a message could not reach someone — their connection had dropped, say — it is marked not delivered under the message rather than silently lost.

How many people can join?

Seven, including you. Because there is no server mixing the call, everyone holds a direct connection to everyone else, so each additional person costs every participant more upload bandwidth — in a full room you are sending six copies of your camera and receiving six streams, around 7.5 Mbps each way.

A good fixed connection handles that. A phone on mobile data, or anyone sharing their screen to a full room, may not — see below.

Someone is knocking. What do I do?

A card appears in the corner with their name, device, and approximate location, and a one-minute countdown. Press the green tick to let them in or the red cross to turn them away. Do nothing and the request expires on its own. Only hosts see these prompts.

How do I share my screen?

Press the screen icon in the dock and pick a window, tab, or whole display. Everyone sees your screen as the main video with the cameras in a side rail, and can click it to zoom in and drag to pan around.

Can two people share at once?

No — one screen at a time. If someone else is already sharing, your button offers to take over, and pressing it stops theirs and starts yours. They are told who took it. Two simultaneous screen shares would cost every person in the call an extra few megabits of upload for a layout nobody can read anyway.

How do I switch cameras?

Open the ⋯ menu in the dock — there is a camera picker there, along with the box for changing your display name. Both take effect immediately for everyone.

What is the coloured bar across the top of a tile?

A live microphone level meter — that is how you tell who is talking. It disappears on anyone who is muted.

What does the HOST / STUN / TURN badge mean?

How that particular connection is routed. HOST means a direct connection on the same network. STUN means direct across the internet, which is the normal case. TURN means the two of you could not reach each other directly and the media is being forwarded by a relay — the call still works and is still encrypted, but quality may drop.

Why does it say "Camera off" on someone's tile?

They turned their camera off. The device is genuinely released rather than blacked out, so their camera light goes off too.

What is the difference between Leave and End for all?

Leave takes you out; the call carries on without you. End for all closes the room for everybody at once, and only appears if you hold the host link.

An ended call cannot be reopened. The same link will not bring it back — deliberately, since otherwise anyone still sitting on the waiting screen would be pulled back into a call you ended on purpose. Starting again means a fresh link.

What happens if the host leaves without ending the call?

The call continues, and the host role passes to whoever has been in the room longest, so newcomers can still be let in. Any knocks that were waiting move to their screen. That inherited host can admit and refuse people, but cannot end the call for everyone — that stays with whoever actually holds the host link.

Connection problems

My friend opened the link but never appeared

Usual causes:

My call dropped when my laptop went to sleep

Expected. The server pings every connection every thirty seconds and drops anything that stops answering for a minute, so a closed lid or a phone that left wifi does not sit there holding a seat in the room. Open the link again to come back.

Does it work on mobile?

Yes, on recent Chrome and Safari for Android and iOS. Tap the link, allow camera and microphone, and you are in. The layout collapses to a single column, and a shared screen puts the cameras along the bottom instead of down the side.

Which browsers are supported?

Any modern browser with WebRTC: Chrome, Edge, Firefox, Safari, Brave, Arc, and the Chromium-based rest. Internet Explorer is not supported and never will be.

Privacy and security

Is the call encrypted?

Yes, and it cannot be turned off. WebRTC encrypts media with DTLS-SRTP by default, so camera, microphone, and screen-share streams are encrypted between participants. Even when a TURN relay has to forward the packets, the relay cannot decrypt them.

Can the server see or record my call?

No. After the introductions, audio and video flow directly between browsers and the server is not in the path. Nothing is recorded, anywhere, by anyone — but note that nothing stops a participant pointing a screen recorder at their own window, exactly as on any other call.

Do other people see my IP address?

Yes. WebRTC has to exchange network addresses to connect at all, so everyone you are connected to learns your IP. In a seven-person call that is six other people, not one. If that matters to you, use a VPN or do not join. The privacy policy has the full picture, including what the server itself records.

Is there a time limit on calls?

No fixed limit. A call runs as long as people stay on the page and the network holds.

Other

Can I report a bug or request a feature?

Yes — email contact@techtoony.com.